IviRFSigGen Configure Frequency Sweep Start Stop [FSW]

IviRFSigGenFrequencySweep Capability Group

This VI configures the start and stop frequencies for a frequency sweep. If the stop frequency is less than the start frequency, the frequency decreases during the sweep

	instrument handle The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	start Specifies the start frequency of the sweep. If the stop frequency is less than the start frequency, the frequency decreases during the sweep. The driver uses this value to set the IviRFSigGen>>Sweep>>Frequency Sweep>>Frequency_SWEEP_START property. Units: Hertz Default Value: 100.0 KHz
	stop Specifies the stop frequency of the sweep. If the stop frequency is less than the start frequency, the frequency decreases during the sweep. The driver uses this value to set the IviRFSigGen>>Sweep>>Frequency Sweep>>Frequency_SWEEP_STOP property. Units: Hertz Default Value: 100.0 MHz
	error in (no error) The error in cluster can accept error information wired from VIs previously called. Use this information to decide if any functionality should be bypassed in the event of errors from other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.
	instrument handle out The instrument handle that you obtain from the IviRFSigGen Initialize or IviRFSigGen Initialize With Options VIs.
	error out The error out cluster passes error or warning information out of a VI to be used by other VIs. The pop-up option Explain Error (or Explain Warning) gives more information about the error displayed.